Newland NLS-FM420 Integration Manual Download

Page: 112 / 199

nlscan.com

Page 102

Symbols

Code Programming ON

Code Programming OFF

Tools

Plessey

NO Check, Transmit All

【

Pro CMD

：

0419050

】

Check, Do Not Transmit Check Digit

【

Pro CMD

：

0419060

】

** Check, Transmit All

【

Pro CMD

：

0419070

】

Check Digit
Plessey may include Check Digits (not compulsory) following its barcode message.

The two digits verify the barcode message.

"NO Check, Transmit All" means to read without check and transmit all

bytes including barcode message and Check Digits.

"Check, Do Not Transmit Check Digit" means to read and check. If veri

ca-

tion is successful, transmits barcode message; if not, engine will not send barcode

message to the Host.

"Check, Transmit All" means to read and check. If veri

cation is successful,

transmits all messages; if not, engine will not send barcode message to the Host.

When

“

Check, Do not Transmit Check digit

”

is enabled and barcode message length

minus one is less than Min Message Length, it will lead to an error.

E.g.

：

Reading a 4-byte (include check byte) Plessey with the Min Message Length being 4

bytes and

“

Check, Do not transmit Check Digit

”

enabled leads to an error.

Summary of Contents for NLS-FM420








































































































































































































Search results

Summary of Contents for NLS-FM420

Reviews:

Related manuals for NLS-FM420

Brands by name

Popular brands

Newland NLS-FM420, Integration Manual

Search results

Summary of Contents for NLS-FM420

Reviews:

Related manuals for NLS-FM420

Brands by name

Popular brands