Newland NLS-FM3051-2X User Manual Download Page 40

Page: 40 / 188

Enter Setup

** Exit Setup

Emulate Numeric Keypad

When this feature is disabled, sending barcode data is emulated as keystroke(s) on main keyboard.

To enable this feature, scan the

Emulate Numeric Keypad

barcode. Sending a number (0-9) is

emulated as keystroke(s) on numeric keypad, whereas sending other characters li

ke “+”, “-”, “*”, “/” and “.”

is still emulated as keystrokes on main keyboard.

** Do Not Emulate Numeric Keypad

Emulate Numeric Keypad

Code Page

The

Code Page

programming feature is provided to support more international characters. This feature is

only effective when ASCII characters are sent in the ALT+Keypad way.

** Windows 1252 (Latin I)

Windows 1251 (Cyrillic)

Summary of Contents for NLS-FM3051-2X





























































































































































































Search results

Summary of Contents for NLS-FM3051-2X

Reviews:

Related manuals for NLS-FM3051-2X

Brands by name

Popular brands

Newland NLS-FM3051-2X, User Manual

Search results

Summary of Contents for NLS-FM3051-2X

Reviews:

Related manuals for NLS-FM3051-2X

Brands by name

Popular brands