Newland NLS-FM3051-2X, User Manual

Page: 176 / 188

162
f. Program the Decoding Area
Example: Set the decoding area to 20% top, 80% bottom, 20% left and 80% right.
1. Scan the Enter Setup barcode.
2. Scan the Specific Area Decoding barcode from the
“Specific Area Decoding” section in Chapter 4.
3. Scan the Top of Decoding Area barcode from the
“Specify Decoding Area” section in Chapter 4.
4. Scan the numeric barcodes
“2” and “0”.
5. Scan the Save barcode.
6. Scan the Bottom of Decoding Area barcode from the
“Specify Decoding Area” section in Chapter 4.
7. Scan the numeric barcodes
“8” and “0”.
8. Scan the Save barcode.
9. Scan the Left of Decoding Area barcode from the
“Specify Decoding Area” section in Chapter 4.
10. Scan the numeric barcodes
“2” and “0”.
11. Scan the Save barcode.
12. Scan the Right of Decoding Area barcode from the
“Specify Decoding Area” section in Chapter 4.
13. Scan the numeric barcodes
“8” and “0”.
14. Scan the Save barcode.
15. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
g. Program the Custom Prefix/Suffix
Example: Set the custom prefix to
“CODE”
1. Check the hex values of
“CODE” in the ASCII Table. (“CODE”: 43, 4F, 44, 45)
2. Scan the Enter Setup barcode.
3. Scan the Set Custom Prefix barcode from the
“Set Custom Prefix” section in Chapter 6.
4. Scan the numeric barcodes
“4”, “3”, “4”, “F”, “4”, “4”, “4” and “5”.
5. Scan the Save barcode.
6. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)