Newland NLS-FM3051-2X User Manual Download Page 50

Page: 50 / 188

Enter Setup

** Exit Setup

Timeout between Decodes (Same Barcode)

Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given

period of time.

To enable/disable the Timeout between Decodes (Same Barcode), scan the appropriate barcode below.

Enable Timeout between Decodes (Same Barcode):

Do not allow the scanner to re-read same

barcode before the timeout between decodes (same barcode) expires.

Disable Timeout between Decodes (Same Barcode):

Allow the scanner to re-read same barcode.

Disable Timeout between Decodes (Same Barcode)

** Enable Timeout between Decodes (Same Barcode)

The following parameter sets the timeout between decodes for same barcode. It is programmable in 1ms

increments from 0ms to 65,535ms. The default setting is 1,500ms.

To learn how to program this parameter, see

Appendix 5

Timeout between Decodes (Same Barcode)

Summary of Contents for NLS-FM3051-2X





























































































































































































Search results

Summary of Contents for NLS-FM3051-2X

Reviews:

Related manuals for NLS-FM3051-2X

Brands by name

Popular brands

Newland NLS-FM3051-2X, User Manual

Search results

Summary of Contents for NLS-FM3051-2X

Reviews:

Related manuals for NLS-FM3051-2X

Brands by name

Popular brands