Page 4 / 10
(2) SHUTTER
A. AUTO : The shutter speed is controlled automatically.
(
※
Default)
B. FLK : Please select FLK mode when flickering occurs on the screen,
due to an imbalance between illumination and frequency.
C. FIXED : The shutter speed is controlled manually.
- You can select the speed from ‘1/60’ to ‘1/90,000 sec. (NTSC), ‘1/50’ to ‘1/90,000 sec. (PAL).
- You can select Digital Slow Shutter.
(DSS)
between x2 ~ x512.
※
Please use FIXED mode only when the light level of the surveillance area is fixed all the time.
(3) SENS-UP
- Low light sensitivity is greatly improved with the use of this function.
- Low light sensitivity level is adjustable from 2 to 512 times.
- When SEN-UP level is higher, the picture becomes brighter while noise
is increased at the same rate of SENS-UP.
ON : Adjustable SENS-UP level between x2 ~ x512.
OFF: SENS-UP is disabled.
※
Default setting is <x8>
☞
Note
When the SHUTTER is set to MANUAL mode, SENS-UP does not operate.
When the AGC is set to OFF, SENS-UP does not operate.
(4) INITIAL SET
Initialize all settings of EXPOSURE menu.
(5) SAVE
Save the settings
5. DAY / NIGHT
It is used to improve the sensitivity and clarity of picture quality at low light
- DAY : The image is always displayed in color.
- NIGHT : The image is always displayed in black and white.
- AUTO1 : The image is automatically converted to B/W from Color at 3 lux.
● IR WDR LEVEL: Select Anti - IR saturation level among
OFF/LOW/MIDDLE/HIGH
● IR WDR ADJUST: Adjust the value in each of selected level - 0 ~ 6
- AUTO2: The image is automatically converted to B/W from Color at 3 lux.
● D/N LEVEL: LOW/MIDDLE/HIGH
● FILTER DLY: Select the duration time about changing the Day/Night
mode. (1 SEC, 3 SEC, 5 SEC, 10 SEC, 15 SEC, 30 SEC, 60 SEC)
● NIGHT BURST: Burst ON/OFF selectable.
● INITIAL SET: Initialize all settings of AUTO2 menu.
