8 version 1.0.1
6. Troubleshooting
If there are problems in operating, please refer to the checklist below. If the problem persists, please contact
the agent where this product is purchased.
Problems
Troubleshooting
Nothing appears on the screen.
Please check that the power cord and line connection
between the camera and monitor are fixed properly.
Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen is dim.
Is lens stained with dirt? Clean your lens with soft,
clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change
the camera position.
The image on the screen is dark.
Adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
Please check that you have properly connected the camera
to an appropriate power source.
The DAY/NIGHT menu
does not work.
Please check if DAY NIGHT menu is set to ‘AUTO1’.
The SENS-UP function
does not work.
Please check that AGC of EXPOSURE SETUP menu is set to ‘OFF’.
Please check that SHUTTER of EXPOSURE SETUP menu is set to
‘A.FLK’ or ‘FIXED’.
The MOTION DETECTION
function is not working.
Please check if MOTION DETECTION function is turned on.
Please check if MD LEVEL is too low.
Please check the setting of the MD area.
Color is not correct.
Please check the setting of WHITE BAL SETUP menu .
The screen flickers continually.
Please check that direction of camera turns toward the Sun.
