Page 10 / 10
COMM SET
(Communication seting)
This function sets up the camera communication status when controlling
the camera through an external control device.
- CAMERA ID
CAMERA ID : Determines the camera’s identification
number (between 0 and 255).
ID POSITION: Displays camera title on top left & right side of
the screen.
BAUD RATE : You can select 4800/9600/19200/38400/57600 bps .
SAVE/REBOOT: Select this to save the COMM SET menu setting and
return to the main screen.
PREVIOUS: Return to COMM SET menu.
☞
Note
- RS-485 cable : Please connect (-) firstly and then (+).
- IF there happens RS-485 cable conection error or any other problems, a message
‘ERROR RS-485 Connection. Please Reconnect and Reboot’
is displayed
.
Please reset the power or OSD.
FACTORY RESET
Resets the camera setting to the factory defaults.
But <COMM SET> menu is not initialized.
12. EXIT
Save all setting menus by pressing the Tact SW and then exit by pressing EXIT menu.