- 34 -
www.NewLeader.com
(800) 363-1771
312521-AA-C
NL4258/4330G4 EDGE
Hillside Divider & Conveyor Cover - MultApplier
The following steps apply to
M
ult
A
pplier
units only� Continue to “Micro Cover Installation” for
M
ulti
B
in
units�
NOTICE!
Highway Equipment Company will not be liable for misapplied material due to an improperly
adjusted divider, spreader or both�
Figure 14A -
M
ult
A
pplier
Hillside Divider
Loosen hardware from rear two chain shield holes
on each side of
M
ult
A
pplier
� Install
M
ult
A
pplier
Hillside Divider (A) and fasten to Support using
single bin Hillside Divider hardware removed
before
M
ult
A
pplier
installation (B)� Adjust Hillside
Divider so that the middle divider is centered
over both conveyors and the Material Divider
(C) as shown in Figure 14� Tighten all hardware
to recommended torque�
Figure 14B -
M
ult
A
pplier
Dual Conveyor Cover
Parts Needed:
Description
Qty
Cover
1
Hair Pin
2
Insert Installation
B
C
A
