7 - MAINTENANCE
To drain the transmission oil:
1.
Remove the drain plug. Drain the oil in to a suitable
container.
2.
Reinstall the drain plug after the oil is drained.
3.
Remove the dipstick
(2)
and adapter fitting
(3)
and
add oil through dipstick hole
(4)
. Add oil until level
is to upper mark on the dipstick. Do not overfill.
4.
Start the engine and operate the hydraulic system.
Fully raise and lower the three point linkage.
5.
Shut off the tractor and wait for few minutes, for
checking the system for leaks.
6.
Check the oil level. The oil level should be between
the two marks on dipstick.
GNIL14TR00564AA
1
86090135N
2
86096197N
3
NOTICE:
Do not fill above the top mark.
Transmission/Rear Axle Oil Capacity
Capacity
25 l
(
6.6 US gal
)
Oil Type:
NEW HOLLAND AMBRA MULTI G 134™ HYDRAULIC
TRANSMISSION OIL
Fuel tanks - Cleaning
1. Clean the fuel tank once in a year or at every
1200 h
which ever is earlier. For further details contact your
authorized dealer
7-33
Summary of Contents for Workmaster 50
