New Holland Workmaster 50, Operator'S Manual

Page: 56 / 184

3 - CONTROLS AND INSTRUMENTS
Brake pedals - Control identification
WARNING
Loss of control hazard!
One-sided brake force exists if you do not use
the brake pedal latch, and if you do not de-
press the left and right pedals at the same
time. ALWAYS use the brake pedal latch when
traveling at transport speeds and/or when a
trailer with hydraulic or air-applied brakes is
attached to the machine.
Failure to comply could result in death or se-
rious injury.
W0375A
Brake pedals
The left-hand and right-hand foot brakes (1) & (2) , may
be operated independently to assist turning in confined
spaces or locked together for normal stopping. When op-
erating in the field the brake pedals may be unlocked.
However, due to the proximity of the pedals to one an-
other, it is still possible to apply both brakes together when
required. To lock the pedals together, pivot the latch
(3)
into the right-hand brake pedal (2) slot.
NOTE: The brake latch is used to lock both brake pedals
together. Brake pedals must be locked together for road
travel. This will insure uniform brake application and max-
imum stopping ability.
86096194N
1
86096195N
2
3-12