New Holland Workmaster 50, Operator'S Manual, Page: 88 / 184

6 - WORKING OPERATIONS
Power-Take Off (PTO) operation
WARNING
Avoid injury!
Observe ALL precautions listed below when operating Power Take-Off (PTO) driven equipment.
Failure to comply could result in death or serious injury.
W0435A
DANGER
Entanglement hazard!
Make sure all people and obstructions are clear of the implement before engaging the tractor Power
Take-Off (PTO).
Failure to comply will result in death or serious injury.
D0077A
1. Check that you are using the correct PTO speed for
the implement.
2. Follow the operator’s instructions in the operator’s
manual.
3. Make sure that the PTO guard is installed when using
PTO driven equipment
4. DO NOT wear loose clothing when operating PTO
driven equipment.
5. Firmly apply the parking brake, place all control levers
in the neutral position, and block all four wheels before
operating any stationary PTO equipment.
6. DO NOT approach, clean, or adjust PTO driven equip-
ment while the engine is still running.
7. Stop the engine and remove the key. Wait until the
PTO and the equipment stop turning before leaving the
machine or before working on the PTO, or the equip-
ment.
8. With the engine stopped and key removed, the PTO
brake is released and the shaft may be turned by hand
to assist in the installation or removal of the implement
shaft.
6-4