6 - WORKING OPERATIONS
Lift rods, lower links and top link
WARNING
Crushing hazard!
Before disconnecting a lift rod from the lower
link, lower the attached implement to the
ground, and stop the engine. Make sure the
attached implement is correctly supported
and no pressure remains in the hydraulic
system before removing the lift rod securing
pins.
Failure to comply could result in death or se-
rious injury.
W0034A
Left-hand Lift Rod
NOTE:
Left-hand lift rod
(1)
is adjustable but must be re-
moved from the lift arm before length can be changed.
To lengthen or shorten the left-hand lift rod
(1)
:
1. Remove retaining clip
(2)
and pin
(2)
from lift rod.
2. Rotate the top half of the lift rod clockwise to reduce
length.
3. Rotate the top half of the lift rod counter-clockwise to
increase the length.
GNIL14TR00562AA
1
Right-hand Lift Rod
NOTE:
The right-hand lift rod is readily adjustable even
when connected between lift arm and lower link.
To lengthen or shorten the right-hand lift rod, lift the jug
handle up
(4)
and rotate clockwise to increase the length
and counter-clockwise to reduce the length.
GNIL14TR00562AA
2
6-9
Summary of Contents for Workmaster 50
