New Holland 905GBL, Operator'S Manual, Page: 6 / 84

1 - GENERAL INFORMATION
Intended use
Your backhoe is designed and made to move dig, trench, move material(s) and level, although within some physical
limits. The working speed and performance may depend on a number of various parameters, such as weather and
terrain conditions. Though the machine is designed to perform satisfactory in most materials and conditions, there
may be a number of combinations of above parameters, for which there is severe degradation of performance of the
machine. If you notice degradation of performance, contact your NEW HOLLAND dealer for assistance. He may
have useful information for improvements, or a kit may be available to enhance the performance.
• Do not use the machine for another purpose than intended by the manufacturer and outlined in this manual.
• Do not use the machine beyond its limits of terrain gradient and stability as outlined further in this manual. Using
the machine beyond these limits may result in roll-over or tip-over. Observe the recommendations in this manual.
• Use only approved accessories and attachments that are designed for your machine. Consult your dealer on
changes, additions or modifications that may be required for your machine. Do not make any unauthorized modifi-
cations to your machine.
• Do not use the machine near or on soft verges of canals and brooks or banks and verges that are undermined by
rodents. The machine may sink sideways and roll-over.
• Do not use the machine on brittle bridge heads and poor bridge floors. These constructions may collapse and
cause roll-over of the machine. Always check out the condition and carrying capacity of bridges and ramps prior to
engage.
• Do not use the machine without wearing the seat restraint system during activities where roll-over or tip-over haz-
ards exist. The Roll Over Protection Structure (ROPS) structure will only be fully effective when the driver remains
attached to his seat.
• Do not use the machine beyond its limits of dynamic stability. High speed, abrupt maneuvers, and fast and short
cornering will increase the risk of roll-over.
• Be cautious that the center of gravity of the machine may increase when loads on the bucket or attachment are
raised. In these conditions, the machine may roll-over earlier than expected.
• You shall take the necessary precautions to always be aware of the possible presence of bystanders, certainly
when maneuvering in confined areas, such as the farm yard and sheds. Keep people away from the machine
during work; ask bystanders to leave the field. There is not only the risk to be overrun by the machine, but objects
may be dropped from a backhoe. The path of the fallen objects are unknown. Keep bystanders away from the work
area.
• Do not allow riders on the machine.
• A machine has only one operator station and is a one man operated vehicle. Other people on or around the machine
during normal operation are not allowed.
• All persons who will be operating this machine shall possess a valid local vehicle operating permit and/or other
applicable local age work permits.
• The machine is designed and produced exclusively for agricultural use.
• The machine is not designed for light/heavy forestry applications; usage is prohibited for forestry applications.
• All other use will be considered to be contrary to the use specified by CNH INDUSTRIAL AMERICA LLC, who
cannot be held liable for damage to property or the machine, or for personal injuries which may result.
• Persons who risk improper use will therefore assume the responsibility for any consequences arising from such
use.
• Compliance with the instructions for use, maintenance and repairs described in this manual, are the essential pre-
conditions for the use specified by CNH INDUSTRIAL AMERICA LLC.
• The machine must only be used, serviced, or repaired by personnel trained in the relevant working methods and
safety regulations and who have been authorized to work on the machine.
• The user must also observe the rules concerning general safety and accident prevention, including the Highway
Code when driving on public highways.
• Any arbitrary modifications made to this machine will release CNH INDUSTRIAL AMERICA LLC from any liability
resulting from damage or injury.
• CNH INDUSTRIAL AMERICA LLC and all its distribution organizations, inclusive of, but not restricted to, national,
regional, or local distributors, cannot be held liable for damage resulting from the malfunction of parts and/or com-
ponents not approved by CNH INDUSTRIAL AMERICA LLC.
1-2