5 - WORKING OPERATIONS
12. Slowly raise the stabilizers and the boom until the
backhoe is sitting on the ground. See figure
.
NHIL17CT00565AA
7
13. Continue raising the stabilizers until they are in the
upright position. See figure
14. Engage the stabilizer locks.
15. Engage the park brake.
16. Shut off the engine.
NHIL17CT00566AA
8
WARNING
Escaping fluid!
Do not connect or disconnect hydraulic quick coupler under pressurized conditions. Make sure all
hydraulic pressure is removed from the system before connecting or disconnecting hydraulic quick
coupler.
Failure to comply could result in death or serious injury.
W0095B
17. Disconnect the hose with the
90°
male quick coupler
(3)
on the backhoe from the female quick coupler
(4)
on the tractor.
18. Install the dust cap on the female quick coupler
(3)
on the backhoe.
19. Disconnect the hose with the
90°
female quick cou-
pler
(2)
on the backhoe from the male quick coupler
(1)
on the tractor.
20. Install the dust caps on the female quick coupler
(2)
on the backhoe and the male quick coupler
(1)
on the
tractor.
21. Disconnect the hose with the male quick coupler
(6)
on the tractor from the hose with the straight female
quick coupler
(5)
on the backhoe.
22. Install the dust cap on the female quick coupler
(5)
from the backhoe.
23. Connect the male quick coupler
(6)
to the female
quick coupler
(4)
.
NOTICE:
This step must be performed prior to start-
ing the engine or damage could occur to the hydraulic
system.
NHIL17CT00557AA
9
5-11
Summary of Contents for 905GBL
