new brunswick Innova 43, Operation Manual

Page: 83 / 92

83
12.4 Set Commands
Code Meaning Format
CL Command Grow
Lamp
CL < Space >< Arg1 >< CR >
where Arg1 = Set Grow Lamp state (0 = off, 1 = on)
CS Command Speed CS < Space >< Arg1 >< CR >
where Arg1 = Agitation setpoint (####)
CT Command
Temperature
CT < Space >< Arg1 >< CR >
where Arg1 = Temperature setpoint (###.#)
CU Command UV
Lamp CU < Space >< Arg1 >< CR >
where Arg1 = Set UV Lamp state (0 = off, 1 = on)
12.5 Profile Control Commands
Code Meaning Format
PC Clear Profile
(clears profile
step)
PC < Space >< Arg1 >< Space >< Arg2 >< CR >
where Arg1 = Profile number (range 1 to 4) and
Arg2 =Step number (range 1 to 15)
NOTE: If Arg2 is not included, all 15 steps of the
selected profile will be cleared.
PM Profile Mode
(returns status of
current profile
run/hold mode)
PM < CR >
There are no parameters to this command.
Return data format:
<
Arg1 >< Space >< Arg2 >< Space >< Arg3 >< CR >
where Arg1 =Run/hold status (0 = end, 1 = run),
Arg2 =Profile number and
Arg3 =Step number
NOTE: If a profile has not been selected to run, a 0
will be returned for Profile number and Step number.
...continued...
New Brunswick Scientific Co., Inc. User’s Guide