14
3
3
P
P
R
R
E
E
P
P
A
A
R
R
I
I
N
N
G
G
T
T
H
H
E
E
L
L
O
O
C
C
A
A
T
T
I
I
O
O
N
N
3.1
Physical Location
It is essential that the instrument be situated in an area where there is sufficient space for
the shaker to clear walls and potential obstructions during operation. The surface on
which the unit is placed must be smooth, level, and able to support the shaker under full
load operating conditions.
CRUSH WARNING!
Do not attempt to lift the Innova 43/43R by hand.
Always use a lifter or other suitable equipment when raising or
handling the unit.
NOTE:
The Innova 43/43R has casters and leveling feet. When you need to move
the unit across the floor, make sure the feet are raised enough so that the
casters can roll freely without scraping the floor with the feet. At all other
times, make sure the feet are down, to avoid any unintended rolling.
3.2
Environment
The shaker is designed to operate optimally in the following ambient conditions:
10º to 35°C
20 to 80% Relative Humidity (non-condensing)
3.3
Electrical Requirements
The Innova 43/43R can be equipped to run on:
100 Volts, 50 or 60 Hz, 1500 VA maximum
120 Volts, 60 Hz, 1500 VA maximum
230 Volts, 50 Hz, 1500 VA maximum
Check your shaker’s Electrical Specification Plate (located on the back of the unit) to be
sure the electrical requirements of your unit match the output of your electric supply. If
they do not match, contact your NBS representative.
Innova 43 & 43R Incubator Shakers M1320-0050
User’s Guide
Summary of Contents for Innova 43
Page 2: ...2 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
Page 10: ...10 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
Page 79: ...79 11 1 1 CE Declaration of Conformity New Brunswick Scientific Co Inc User s Guide ...
Page 92: ...92 Filling the 33 Wavy Arrows Icon 21 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
