46
If the time is set to 0.0, the shaker will operate continuously until either the lid is
opened or the Start/Stop button is pushed.
7.5.2
Programmed Steps
The resident software for the Innova 43/43R can store up to four programs, each
having as many as 15 steps.
Each step
can be programmed in one-minute
increments, for total periods of one minute up to 99 hours 59 minutes each.
To enter the programming mode, use the Control Knob to select the
PROG
screen
(
see Figure 21, repeated below
). At this point, you can
Run
a program,
Edit
a
program, generate a
New
program or turn a program
Off
.
Off
is the default mode.
Figure 21: Programs Screen
PROGRAMS
Program 1 :
Off
Program 2 :
Off
Program 3 :
Off
Program 4 :
Off
PROG Th 16:23
7.5.3
Creating a Program
To write a
New
program:
1. Use the Control Knob to highlight the mode of Program 1 (in our sample
screen, Figure 21, it is
Off
), then click the Knob in. The selected field begins
to flash.
2. Turn the Knob until the field says
New
. Click the Knob in to select this
mode. The screen for Program 1 - Step 1 will open (
see Figure 22
):
Innova 43 & 43R Incubator Shakers M1320-0050
User’s Guide
Summary of Contents for Innova 43
Page 2: ...2 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
Page 10: ...10 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
Page 79: ...79 11 1 1 CE Declaration of Conformity New Brunswick Scientific Co Inc User s Guide ...
Page 92: ...92 Filling the 33 Wavy Arrows Icon 21 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
