42
On
means the light is always on, and
Off
means the light is always off, unless you
add additional programming.
There is an additional mode for the chamber light:
Auto
. In
Auto
mode, the light
will go on every time you activate the control knob or open the lid. This is the
default mode.
NOTE:
The Lamps screen, shown below, will always indicate
Chamber
light mode.
If the shaker is not equipped with the optional UV germicidal lamp and/or
photosynthetic growth lamps,
UV Decont
and/or
Growth
will say
None
.
Figure 18: Lamps Screen
LAMPS
Chamber :
Auto
UV Decont :
Off
Growth :
Off
LAMP Th 16:20
To change the mode setting
for any of the lamps:
1. Turn the Control Knob to highlight the setting for the lamp of choice, then
click the knob in. The current setting will flash (in the sample screen, we will
use the
Chamber
light as an example.
2. Turn the Knob left or right until the desired mode setting appears (
Auto
in
this example).
3. Click the Knob in to save the new setting.
NOTE:
If you highlight an item, change it, but do not save your selection, after a
few seconds the screen will revert to its previous setting.
To move out of this screen
and into the next:
1. Use the Control Knob to highlight
LAMP
, then click the Knob in.
LAMP
begins to flash.
Innova 43 & 43R Incubator Shakers M1320-0050
User’s Guide
Summary of Contents for Innova 43
Page 2: ...2 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
Page 10: ...10 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
Page 79: ...79 11 1 1 CE Declaration of Conformity New Brunswick Scientific Co Inc User s Guide ...
Page 92: ...92 Filling the 33 Wavy Arrows Icon 21 Innova 43 43R Incubator Shakers M1320 0050 User s Guide ...
