22
My-Netti.com
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
6.11 ADJUSTING THE SEAT DEPTH
AT THE FRONT
It is possible to adjust the seat depth up to 60 mm
at the front. The aim is to have the centre of the
users knee-joint aligned with the leg support knee
pivot point – while the user at the same time has
back support of his lower back – also when the leg
support angle is changed.
•
Unfix the screw holding the pull out piece for the
leg support.
•
Set the pull out piece to the required position.
Tighten the screws with 25 Nm.
6 mm Allen-key.
By setting the pull out pieces to different
positions, it is possible to compensate for
a rotated pelvis or different thigh length.
By users with strong involuntarily
movements the extension pieces must
not be pulled out more than 50 mm.
ABDUCTION BLOCK
The seat plate is prepared for mounting a abduction
block. Position the block bracket in the centre
on top of the seat plate. Push screws through
the 2 holes and fix with nuts from below.
There is a seat plate depth scale
engraved on the seat plate.
