31
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
My-Netti.com
If the head support stand does not fit the
bracket perfectly the bracket is probably
fixed too tight or unevenly.
After fitting the head support fix it properly
by tightening the little set screw in the centre
on top of the head support bracket using an
Allen-key.
If the head support seems to short in
height, it can be turned 180° by releasing
the adjustment wheel at the rear of the
horizontal bar (B).
6.19 PUSH BOW
Adjustment of push bow:
• Release the red handle on the right side of
the push bow.
• Swing the push bow into required position.
• Lock the bow in required position by tightening
the red wheel.
Be sure to lock the push bow properly.
Make sure the wires to brakes and tilt /
recline functions never are sharply bent.
To get the push bow out of the way it can be
turned all the way down till it touches the
chair back.