background image

45  

Model: 

Netti Dynamic S

Language: 

English

 

Version:

 

2021-03

My-Netti.com

8.4 

 DRIVING  TECHNIQUES   

– SLOPE –

Important advise for driving down and uphill 

avoiding the risk of tipping.

   Avoid turning the wheelchair in the  

middle of a slope.

   Always drive as straight as possible.

   It is better to ask for assistance than  

taking risks.

     

Driving uphill:

Move the upper part of the body forwards in order 

to maintain the balance of the chair.

Driving downhill:

Move the upper part of the body backwards to 

maintain balance of the chair. Control the speed of 

the chair by clutching the push rims. Do not use the 

brakes.

8.3 

 DRIVING  TECHNIQUES   

– STEP DOWN –

Companions, drive down a step forwards:

•  Check that the anti-tip is turned up.

•   Angle the wheelchair backwards, moving the 

front castors slightly up in the air.

•   Drive carefully down the step and angle the 

wheelchair forward putting the front castors  

back on the ground.

   Turn the anti-tip downwards.

Companions, drive down a step backwards: 

•   Check that the anti-tip is turned up.

•   Move the wheelchair backwards to the step.

•   Drive carefully down the step and move the 

wheelchair backwards on the main wheel until 

the front castors have come away from the step.

•  Put the front castors down on the ground.

   Turn the anti-tip downwards.

Summary of Contents for DYNAMIC S





























































Reviews: