40
My-Netti.com
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
DECREASE THE POSSIBILITY OF SLIDING SHEAR
AND PRESSURE SORES:
The tilt angle is to be used to achieve variation
of the seating position for the user. It is common
knowledge that recline should not be adjusted
after the back angle is accommodated to the user’s
best seating position.
The muscle tone of the neck and back should be
as low as possible for the user to prevent sliding,
and a change of the recline angle from the original
position will interrupt and destroy the correct body
position, and cause an increased muscle tone in the
neck.
If the recline function is used during a
transfer situation or other situations, it is
very important that the recline angle is
adjusted back to the correct, original
position when the user is back to a normal
seating position.
Wrong use of recline causes an increased
possibility of sliding, and this means an
increased danger of shear vertical and
horizontal forces and pressure sores.
A backward tilted seat unit gives a steeper seating
angle in relation to the surface, and prevent sliding
of the wheelchair user.
The seat unit can be tilted from 0° to +35°.
There is a tilt scale on the chair side.
The tilt sign sits on the
push bar to the left:
The seat and back rest angle must not
be adjusted without using the anti-tips.
To ensure correct function of the wires,
these must never be taut.
