background image

59  

Model: 

Netti Dynamic S

Language: 

English

 

Version:

 

2021-03

My-Netti.com

13.   MEASURES & WEIGHT  

Seat  

width*

Seat depth  

standard**

Backrest height 

*** 

Total width = 

Transport width

Weight

250 mm

250 – 350 mm

375 mm

405 mm

23,3 kg

300 mm

250 – 350 mm

375 mm

460 mm

24,0 kg

350 mm

250 – 350 mm

375 mm

515 mm

24,7 kg

*     Measured between skirt guards.

**     Measured from front of seat plate to back rest hinge without cushion.  

Superstabil S backrest cushion subtract approximately 30 mm.

***   Measured from the seat plate to the top of Netti Seating System back cushion.

  

The weight is including main wheels, front castors, leg supports and arm supports.  

No cushions.

  

Max user weight is 75 kg. 

 When mounting accessories such as power kit etc, the weight of  

the accessories and luggage must be subtracted from the max user weight. 

   Luggage attached to the wheelchair must not be heavier than 8 kg. The luggage must not be 

attached in a way that change the stability of the chair.

   Max user weight is 75 kg when Netti Dynamic S is being used as a seat in a vehicle.  

  

Recommended inflation pressure using air tyres is: 60 – 65 PSI.

Summary of Contents for DYNAMIC S





























































Reviews: