30
My-Netti.com
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
Adjusting the head support in depth:
• Release the locking lever on top of
the vertical bar
(A)
.
• Adjust the head support and fix it
in required position.
Adjusting the head support in height:
• Release the locking lever on the
head support adapter
(C)
.
• Adjust the head support and fix it
in required position.
Adjusting the head support in angle:
• Release the adjustment wheel at the
rear of the horizontal bar
(B)
.
• Adjust the head support and fix it
in required position.
Adjusting the head support sideways:
• The head support adapter can be moved both
to the right and left, giving the possibility to
accomodate special needs for head support.
• Untighten the four screws holding the
adapter together.
• Move the adapter to the required position
and fix the adapter by tightening the screws
diagonally.
Remember to release the levers
when adjusting the head support.
6.18 HEAD SUPPORT
The depth of the head support should be adjusted
to barely touch the back of the user’s head when
sitting relaxed.
The height of the head support needs to be
adjusted to fit directly behind the head.
A
– Lever for depth adjustment
B
– Wheel for angle adjustment
C
– Lever for height adjustment
D
– Head support bracket.
Place the squared nut in the trace of the head
support bracket as shown below.
• Place the head support in the head support
bracket.
• The height and the depth of the head support
is set to the required positions and tightened.
• The head support bracket is fixed by tightening
the four screws two by two diagonally so the
bracket is fixed with the same strength divided
on the four screws.
