Netopia 430 S/T, Reference Manual

Page: 176 / 276

Monitoring Tools 9-3
IP Address: The Netopia ISDN Router’s IP address, entered in the IP
Setup screen.
IPX Network Address: The Netopia ISDN Router’s IPX address,
entered in the IPX Setup screen.
AppleTalk ET Address: The Netopia ISDN Router’s AppleTalk
address on its EtherTalk Phase II inter face, entered in the AppleTalk
Setup screen.
AppleTalk LT Address: The Netopia ISDN Router’s AppleTalk
address on its LocalTalk inter face, entered in the AppleTalk Setup
screen.
Current ISDN Connection Status
This section is a table showing the current status of each ISDN
connection. There are four columns in the table:
Profile Name: Lists the name of the connection profile being used,
if any. This field will also indicate if the B channel is in use for a
POTS call.
State: Lists the B-channels in use for this connection.
%Use: Indicates the average percent utilization of the maximum
capacity (56k, 64k, 112k, or 128k) of the B-channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote
network if the connection is using IP. Other wise, shows the IPX
address of the connected remote network, if using IPX. For POTS
calls, it shows the called DN if locally originated, other wise the
calling DN (if available).
Est: Indicates whether the connection was locally or remotely
established.
More Info: Indicates, in order of priority, the NAT address in use for
this connection, the IPX address in use (if IP is also in use), or the
caller ID (if available).