AppleTalk Setup
6-11
■
You can also set the range of EtherTalk Phase II network
numbers. Select
Net Low
and enter the lower limit of the
network number range. Select
Net High
and enter the upper
limit of the range.
■
Select the
Seeding
pop-up menu and choose the seeding
method for Netopia to use.
You have finished configuring EtherTalk Phase II.
LocalTalk
The Netopia ISDN Router can function as a LocalTalk to EtherTalk
router. This means that a LocalTalk network can be connected to the
Netopia’s LocalTalk por t. You can enable this feature by configuring
the Netopia’s LocalTalk por t.
Select
LocalTalk Setup
in the AppleTalk Setup screen and press
Return to the LocalTalk Routing Setup screen.
Netopia Corporate models
LocalTalk Routing Setup
LocalTalk Enabled:
On
LocalTalk Zone Name:
Unnamed
LocalTalk Net Number:
0
Seeding...:
Soft-Seeding
Use this screen to set up the LocalTalk Port Routing attributes.
■
If you are using LocalTalk with the Netopia ISDN Router, select
LocalTalk Enabled
and make sure LocalTalk is set to
On,
which
is the default.
Summary of Contents for 430 S/T
