Advanced Settings
86
N300 Wireless Router WNR2000v4
•
The security option needs to be WEP (or no security). The WEP option displays only if
you select Up to 54 Mbps from the Mode menu on the Wireless Settings screen (see
Basic Wireless Settings
on page
27).
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You need to know the wireless MAC addresses of all units. First, set up the
base station, and then set up the repeater.
To set up the base station:
1.
Select
Advanced > Advanced Setup > Wireless Repeating Function
.
The Wireless Repeating Function screen displays. The wireless MAC address of the
router is displayed onscreen.
2.
Select the
Enable Wireless Repeating Function
check box.
3.
Select the
Wireless Base Station
radio button.
4.
(Optional) Select the
Disable Wireless Client Association
check box to prevent wireless
clients from associating with the base station and allowing LAN client associations only. You
can leave the check box cleared if you prefer wireless clients to be able to associate with the
base stations.
5.
In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that should function as repeaters.
If your router is the base station, it can function as the “parent” for up to 4 other access
points.
