Supplemental Information
136
N300 Wireless Router WNR2000v4
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the
Restore Factory Settings
button on the back panel of
the router for at least 7 seconds. The router resets, and returns to the factory settings.
Your
device returns to the factory configuration settings that are shown in the following table.
Table 4. WNR2000v4 router factory default settings
Feature
Default behavior
Router login
User login URL
www.routerlogin.com or www.routerlogin.net
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
Autosensing
Local area
network (LAN)
LAN IP
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
United States is Pacific time; otherwise, varies by region
Time zone daylight saving time
Disabled
Wireless
Wireless communication
Enabled
SSID name
Preset. For information, see the router label. (For a
description of the router label, see
Label
on page
12.)
Network key (password)
Broadcast SSID
Enabled
Transmission speed
Auto
Note:
The maximum wireless signal rate derived from
IEEE Standard 802.11 specifications. Actual throughput
varies. Network conditions and environmental factors,
including volume of network traffic, building materials and
construction, and network overhead, lower actual data
throughput rate.
Country/region
United States in the US; otherwise varies by region
RF channel
Auto
Operating mode
Up to 150 Mbps
