Connections Setup
24
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
happens, experiment with different channels to see which is the best. The default setting
is Auto, which means that the WiFi bridge/extender selects a channel automatically.
Note:
When you use multiple access points, it is better if adjacent access
points use different channels to reduce interference. In the 2.4 GHz band, the
recommended channel spacing between adjacent access points is five
channels (for example, use Channels 1 and 6, or 6 and 11).
7.
Select the mode from the
Wireless mode
list.
Mode
.
Up to 150 Mbps
is the default setting.
Up to 54 Mbps
supports 802.11g and 11b
wireless devices. The
300 Mbps
setting allows 802.11n devices to connect at this speed.
8.
Specify the security option:
You can change the wireless authentication and encryption option and the passphrase
(also referred to as the wireless network password or network key). The security that you
select encrypts data transmissions and ensures that only trusted devices receive
authorization to connect to your network.
WARNING:
Best practice is that you do not change the wireless security
option or the passphrase. Do not disable wireless security!
•
To set up WPA-PSK, WPA2-PSK, or WPA-PSK + WPA2-PSK mixed mode security,
see
WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode
25.
•
To set up WPA/WPA2 enterprise security, see
26.
•
To set up WEP security, see
9.
Click the
Apply
button.
10.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
•
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
•
Does your wireless device or computer display on the Attached Devices screen? If it
does, then it is connected to the network.
•
If you are not sure what the SSID or password is, look on the label on your WiFi
bridge/extender.
Note:
The WEP option displays only if you select
Up to 54 Mbps
from the
Mode
list.