NETGEAR WM2500RP User Manual Download Page 18 | Manualshive

Page: 18 / 62

NETGEAR WM2500RP User Manual Download Page 18

Get Started with NETGEAR genie

18

MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP

The Firmware Upgrade Assistant displays.

2.

Click the

Yes

button.

The WiFi bridge/extender upgrades to the latest firmware. After the upgrade, the WiFi
bridge/extender restarts.

CAUTION:

Do not try to go online, turn off the WiFi bridge/extender, shut down the
computer, or do anything else to the WiFi bridge/extender until the WiFi
bridge/extender finishes restarting and the Power LED has been solid
green for several seconds.

For more information about upgrading firmware, see

Upgrade the WiFi Bridge/Extender

Change the Password

The default password that you use to log in to the WiFi bridge/extender is password. Best
practice is that you change this default password to a secure password.

Changing the default password is not the same as changing the password for wireless
access. The label on your WiFi bridge/extender shows your unique wireless network name
(SSID) and the passphrase (also referred to as the wireless network password or network
key) for wireless access (see



To change the default password that you use to log in to the WiFi bridge/extender:

1.

Log in to the WiFi bridge/extender.

For more information, see

Use NETGEAR genie after Installation

«
...
16
17
18
19
20
...
»

Summary of Contents for WM2500RP































































Reviews:

No comments