Get Started with NETGEAR genie
16
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
•
If you already used NETGEAR genie, type
http://www.routerlogin.net
in the
address field for your browser to display the NETGEAR genie screen. For more
information, see
Use NETGEAR genie after Installation
16.
4.
Follow the onscreen instructions to complete the NETGEAR genie setup.
NETGEAR genie guides you through connecting the WiFi bridge/extender to the Internet.
5.
If the browser cannot display the web page, do the following:
•
Make sure that the computer is connected to the LAN Ethernet port or wirelessly to
the WiFi bridge/extender.
•
Make sure that the WiFi bridge/extender is running. If it is, its WiFi LEDs are lit.
•
Close and reopen the browser to make sure that the browser does not cache the
previous page.
•
Browse to
http://routerlogin.net
.
•
If the computer is set to a static or fixed IP address (this situation is uncommon),
change it to obtain an IP address automatically from the WiFi bridge/extender.
6.
If the WiFi bridge/extender does not connect to the Internet, do the following:
a.
To be sure that you have selected the correct options and typed everything correctly,
review the WiFi bridge/extender’s settings.
b.
Contact your ISP to verify that you have the correct configuration information for
your main Internet connection.
c.
Read
Use NETGEAR genie after Installation
When you first set up your WiFi bridge/extender, NETGEAR genie automatically starts when
you launch an Internet browser on a computer that is connected to the WiFi bridge/extender.
To use NETGEAR genie again to view or change settings:
1.
Launch your browser from a computer or wireless device that is connected to the WiFi
bridge/extender.
2.
Enter
http://www.routerlogin.net
or
http://www.routerlogin.com
in the web browser
address bar.
A login screen displays.
admin
********