Hardware Setup
12
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
To cable your WiFi bridge/extender:
1.
Install a MoCA-capable signal splitter between the coaxial port and your existing TV (
1
).
1
2
3
4
5
7
6
MoCA gateway
MoCA WiFi
bridge/extender
You can skip this step if you do not have a TV or other device connected to the coaxial
port.
2.
Use a coaxial cable (
2
) to connect the WiFi bridge/extender to the MoCA-capable signal
splitter or your coaxial port.
3.
Use the Ethernet cable (
3
) to connect your computer to the WiFi bridge/extender.
4.
Connect the power adapter (
4
).
5.
Power on your WiFi bridge/extender (
5
).
The WiFi bridge/extender
takes a couple of minutes
to join your network.
6.
After the WiFi bridge/extender
joins your network, the following LEDs are lit: