Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
5-4
v1.0, November 2005
AutoCell Configuration Options
Auto RF Management
In this mode, AutoCell APs and clients load-balance traffic across underutilized APs. This mode
avoids interference from neighbors, clients, APs, and other unexpected sources.
There are three AutoCell configuration setting
choices:
•
Auto RF Management: Enabled by default.
•
Enhanced RF Security: Disabled by default.
•
Rogue Device Detection: Disabled by
default.
These options are discussed below.
Figure 5-4
Note:
Channel selection and power management is automatically adjusted by the
AutoCell Auto RF Management option. The Auto RF Management option is
enabled by default.
