Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
2-5
November 2005
•
WG311T 802.11g 108 Mbps Wireless PCI Card
•
WG511T 802.11g 108 Mbps Wireless CardBus Adapter
•
WG511 802.11g 54 Mbps Wireless CardBus Adapter
•
WG111 801.11g 54 Mbps Wireless Bridge
System Requirements
Before installing the WG102, make sure your system meets these requirements:
•
A 10/100 Mbps Local Area Network device such as a hub or switch.
•
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it
•
A 100-240 V, 50-60 HZ AC power source.
•
A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or
Netscape Navigator 4.78 or above.
•
At least one computer with the TCP/IP protocol installed.
•
802.11g or 802.11b-compliant devices, such as the NETGEAR WG511 Wireless Adapter.
What’s In the Box?
The product package should contain the following items:
•
NETGEAR WG102 ProSafe 802.11g Wireless Access Point.
•
Power adapter and cord.
•
Straight through Category 5 Ethernet cable.
•
802.11g ProSafe Wireless Access Point Installation Guide WG102.
•
Resource CD for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point
.
Installation Guide for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point.
•
Support Registration card.
