Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
4-3
v1.0, November 2005
Table 4-1.
General Information Fields
Field
Description
Access Point Information
Access Point Name
(NetBIOS name)
The default name may be changed if desired.
Country/Region
The domain or region for which the wireless access point is licensed for
use. It may not be legal to operate this wireless access point in a region
other than one of those identified in this field.
Firmware Version
The version of the firmware currently installed.
Access Point Mode
The operating mode of the WG102: Access Point, Point-to-point bridge,
Multi-point bridge or Repeater.
VLAN (802.1Q)
Indicates if VLAN support is enabled. The default is disabled.
Management VLAN ID
Displays the VLAN ID.
Current IP Settings
IP Address
The IP address of the wireless access point.
Subnet Mask
The subnet mask for the wireless access point.
Default Gateway
The default gateway for the wireless access point communication.
DHCP Client
If this is enabled, the current IP address was obtained from a DHCP
server on your network. Disabled indicates a static IP configuration.
MAC Address
The Media Access Control address (MAC address) of the wireless
access point’s Ethernet port.
Current Wireless Settings
Channel/Frequency
The channel the wireless port uses. The default channel setting is 11.
For the frequencies used on each channel, see
http://documentation.netgear.com/reference/enu/wireless/index.htm
.
Security Profiles
For each Security Profile, the following are displayed: Profile name,
SSID, security option, VLAN ID, and enabled/disabled.
