manualshive.com logo in svg

NETGEAR VEVG2660-1TKSAS, User Manual

Share
Download
NETGEAR VEVG2660-1TKSAS User Manual Download Page 90

Manage Your Network 

90

VDSL Voice Gateway 

Erase the Current Configuration Settings

You can erase the current configuration and restore the factory default settings. You might 
want to do this if you move the gateway to a different network. (For more information, see 

Factory Settings 

on page

 

114.)

To erase the configuration settings:

1. 

Launch a web browser from a computer or wireless device that is connected to the 
network.

2. 

Type 

http://routerlogin.net 

or 

http://10.0.0.2

.

A login screen displays.

3. 

Enter the gateway user name and password.

The user name is 

admin

. The default password is 

admin

. The user name and password 

are case-sensitive.

The BASIC Home screen displays.

4. 

Select 

ADVANCED > Administration >

 

Backup Settings

.

5. 

Click the 

Erase

 button.

The factory default settings are restored. The user name is admin, the password is password, 
and the LAN IP address is 10.0.0.2. DHCP is enabled.

Change the admin Password

You can change the default password that is used to log in to the gateway with the user name 
admin. This password is not the one that you use for WiFi access. The product label shows 
your unique wireless network name (SSID) and password for wireless access.

To set the password for the user name admin:

1. 

Launch a web browser from a computer or wireless device that is connected to the 
network.

2. 

Type 

http://www.routerlogin.net 

or 

http://10.0.0.2

.

A login screen displays.

3. 

Enter the gateway user name and password.

The user name is 

admin

. The default password is 

admin

. The user name and password 

are case-sensitive.

The BASIC Home screen displays.

Summary of Contents for VEVG2660-1TKSAS





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands