NETGEAR VEVG2660-1TKSAS User Manual Download

Page: 60 / 116

Specify Network Settings

VDSL Voice Gateway

Reserve an IP Address



To reserve an IP address:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Setup > LAN Setup

In the Address Reservation section of the screen, click the

Add

button.

In the

IP Address

field, type the IP address to assign to the computer or server.

Choose an IP address from the gateway’s LAN subnet, such as 10.0.0.x.

Type the MAC address of the computer or server.

Tip:

If the computer is already on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.

Type a name for the device.

Click the

Add

button

The reserved address is entered into the table.

The reserved address is not assigned until the next time the computer contacts the
gateway’s DHCP server. Reboot the computer, or access its IP configuration and force a
DHCP release and renew.

Edit a Reserved LAN IP Address



To edit a reserved address:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Summary of Contents for VEVG2660-1TKSAS





















































































































Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands

NETGEAR VEVG2660-1TKSAS, User Manual

Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands