manualshive.com logo in svg

NETGEAR VEVG2660-1TKSAS, User Manual

Share
Download
NETGEAR VEVG2660-1TKSAS User Manual Download Page 18

Internet Setup 

18

VDSL Voice Gateway 

Static IP Address

Internet service with a static IP address is uncommon. If the Setup Wizard detects this type of 
Internet connection, you are prompted to enter the following information:

•

The Internet service provider’s recommendation for one of these settings:

-

Use Static IP Address

 

-

Use IP Over ATM

 (IPoA — RFC1483 Routed) 

•

Your assigned IP address, subnet mask, and the IP address of your ISP gateway 

•

The IP address of your ISP primary DNS server and a secondary DNS server address if 
one is available

Your Internet service provider can provide this information to you.

Manually Specify an Internet Connection with a Login

To configure an Internet connection with a login:

1. 

Launch a web browser from a computer or wireless device that is connected to the 
network.

2. 

Type 

http://routerlogin.net 

or 

http://10.0.0.2

.

A login screen displays.

3. 

Enter the gateway user name and password.

The user name is 

admin

. The default password is 

admin

. The user name and password 

are case-sensitive.

The BASIC Home screen displays.

Summary of Contents for VEVG2660-1TKSAS





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands