NETGEAR VEVG2660-1TKSAS User Manual Download

Page: 86 / 116

Manage Your Network

VDSL Voice Gateway

Reboot the Gateway

Rebooting the gateway disconnects all computers and mobile devices from the gateway’s
network.



To reboot the gateway:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Click the

ADVANCED

tab.

In the Router Information pane, click the

Reboot

button.

A confirmation message displays.

Click the

button.

The gateway reboots.

View Logs of Gateway Activity

The log is a detailed record of the websites you have accessed or attempted to access. Up to
256

entries are stored in the log. Log entries display only when keyword blocking is enabled.

No log entries are made for the trusted LAN client.



To view and customize logs:

Launch a web browser from a computer or wireless device that is connected to the
network.

Summary of Contents for VEVG2660-1TKSAS





















































































































Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands

NETGEAR VEVG2660-1TKSAS, User Manual

Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands