NETGEAR VEVG2660-1TKSAS User Manual Download

Page: 34 / 116

Control Access to the Internet

VDSL Voice Gateway

Edit an Outbound Firewall Rule

This feature is for advanced administrators only. Incorrect configuration causes serious
problems.



To edit an outbound rule:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Security > Firewall Rules

The table under Outbound Services lists all existing rules for outbound traffic. If you have
not defined any rules, only the default rule is listed. The default rule allows all outgoing
traffic.

Select the radio button for the rule.

Click the

Edit

button.

Change the settings.

Click the

Apply

button.

Your settings are saved.

Delete an Outbound Firewall Rule



To delete an outbound rule:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Security > Firewall Rules

Summary of Contents for VEVG2660-1TKSAS





















































































































Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands

NETGEAR VEVG2660-1TKSAS, User Manual

Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands