Specify Network Settings
63
VDSL Voice Gateway
4.
Select
Wireless
.
5.
To control the SSID broadcast, select or clear the
Enable SSID Broadcast
check box.
When this check box is selected, the gateway broadcasts its network name (SSID) so
that it displays when you scan for local WiFi networks on your computer or wireless
device.
6.
To change the SSID, type a new name in the
Name (SSID)
field.
The name can be up to 32 characters long and is case-sensitive. The default SSID is
randomly generated and is on the gateway’s label. If you change the name, make sure to
write down the new name and keep it in a safe place
.
7.
In the
Region
list, select your region.
In some locations, you cannot change this setting.
8.
To change the wireless channel, select a number in the
Channel
list.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. NETGEAR recommends channel spacing between
adjacent access points of four channels (for example, use Channels 1 and 5, or 6 and
10).
9.
To change the mode, select it from the
Mode
list.
•
Up to 145 Mbps
. This is the default setting, which allows 802.11n and 802.11g
wireless devices to join the network.
•
g & b. This
supports up to 54 Mbps.
•
300-Mbps
.802.11n devices can connect at this speed.
10.
Click the
Apply
button.
Your settings are saved.
