Control Internet Access
42
Dual Band Wireless VDSL2 + Ethernet Gateway
4.
Select
Advanced > Security > Firewall Rules
.
If you did not define any outbound rules, only the default rule is listed in the Outbound
Firewall Rules table. The default rule allows all outgoing traffic.
5.
Click the
Add
button.
6.
In the
Services
list, select the service.
If the service is not in the list, select
User Defined
. If you select
User Defined
, you must
select the protocol and enter the name and the range of port numbers used by the
service. For services on the list, these fields are filled in automatically.
7.
In the
Action
list, select a block or allow setting.
8.
To block specific LAN users, in the
LAN Users
list, select
Single Address
or
Address
Range
and type the IP address or addresses.
9.
To block specific WAN servers, in the
WAN Services
list, select
Single Address
or
Address Range
and type the IP address or addresses.
10.
To log instances of when this rule is used, in the
Log
list, select
Always
.
11.
Click the
Apply
button.
Your settings are saved. The Firewall Rules screen displays the new rule.
