NETGEAR R8300 User Manual Download Page 133

Page: 133 / 187

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > USB Functions > ReadySHARE Storage.

The ReadySHARE page displays.

Click the ReadyCLOUD tab.

Enter your ReadyCLOUD user name and password and click the Register button.

If you did not create a ReadyCLOUD account, see

Create a ReadyCLOUD Account

on page 131.

The router is registered with ReadyCLOUD.

If the router’s Internet connection mode is set to Dial on Demand, the router automatically
changes the connection mode to Always On. This change is required for ReadyCLOUD to
remotely access the USB storage device.

Note

After registration, visit

readycloud.netgear.com

10.

Click the Sign In link, enter your ReadyCLOUD user name and password, and click the Sign In button.

Share USB Storage Devices Attached to the Router

133

Nighthawk X8 AC5000 Tri-Band WiFi Router

Summary of Contents for R8300




























































































































































































Search results

Summary of Contents for R8300

Reviews:

Related manuals for R8300

Brands by name

Popular brands

NETGEAR R8300, User Manual

Search results

Summary of Contents for R8300

Reviews:

Related manuals for R8300

Brands by name

Popular brands