NETGEAR GS700TS Series, User Manual

Page: 91 / 189

GS700TS Series Smart Switch Software User Manual
5-62 Configuring The Device Using Your Browser
v1.0, November 2006
To configure LACP for LAGs:
1. Click LAG Configuration > LACP . The LACP Parameters Page opens:
The LACP Parameters Page contains the following fields:
• LACP System Priority – Specifies system priority value. The field range is 1-65535. The
highest priority is 1 and the lowest is 65535. The field default is 1.
• Unit No. – Displays the stacking member for which the LAG parameters are defined.
• Interface – Displays the interface number to which timeout and priority values are
assigned.
• Interface Priority – Displays the LACP priority value for the interface. The field range is
1-65535. The highest priority is 1 and the lowest is 65535. The field default is 1.
• LACP Timeout – Displays the administrative LACP timeout. The short timeout time is 3
seconds and the long time out time is 90 seconds.
Figure 5-48