NETGEAR GS700TS Series, User Manual

Page: 68 / 189

GS700TS Series Smart Switch Software User Manual
Configuring The Device Using Your Browser 5-39
v1.0, November 2006
To configure RADIUS servers:
1. Click Management Security > RADIUS . The RADIUS Page opens:
The RADIUS Page contains the following fields:
• Primary Server – Defines the RADIUS Primary Server authentication fields.
• Backup Server – Defines the RADIUS Backup Server authentication fields.
• Host IP Address – Defines the RADIUS Server IP address.
• Authentication Port – Identifies the authentication port. The authentication port is used
to verify the RADIUS server authentication. The authenticated port default is 1812.
• Number of Retries – Defines the number of transmitted requests sent to the RADIUS
server before a failure occurs. Possible field values are 1-10. The default value is 3.
• Timeout for Reply – Defines the amount of time (in seconds) the device waits for an
answer from the RADIUS server before retrying the query, or switching to the next server.
Possible field values are 1-30. The default value is 3.
Figure 5-35