NETGEAR GS700TS Series, User Manual

Page: 47 / 189

GS700TS Series Smart Switch Software User Manual
5-18 Configuring The Device Using Your Browser
v1.0, November 2006
Switching Between Stack Masters
The Secondary Master replaces the Stacking Master if the following events occur:
• The Stacking Master fails or is removed from the stack.
• Links from the Stacking Master to the stacking members fails.
• A soft switchover is performed via web interface.
Switching between the Stacking Master and the Secondary Master results in a limited service loss.
Any dynamic tables are relearned if a failure occurs. The running configuration file is
synchronized between Stacking Master and the Secondary Master, and continues running on the
Secondary Master.
To switch between stack masters:
1. Open the Stack Management Page.
2. Select the Force Master radio button.
3. Select “2” from the drop-down list which enables switching the stack control to the Secondary
Stack Master.
4. Click . A confirmation message is displayed.
Configuring Device Security
This section contains information for managing both storm control and port security and includes
the following topics:
• Defining Port Authentication Properties
• Viewing EAP Statistics
• Enabling Storm Control
• ACL Overview
• Defining MAC Based Access Control Lists
• Defining RADIUS Settings
• Defining RADIUS Settings
• Defining RADIUS Settings
• Defining Authentication