NETGEAR GS700TS Series, User Manual

Page: 161 / 189

GS700TS Series Smart Switch Software User Manual
5-132 Configuring The Device Using Your Browser
v1.0, November 2006
To modify the port mirroring settings:
1. Click Monitor > Port Mirroring .
2. Click an interface. The Modify Port Mirroring Page opens:
3. Modify the relevant fields.
4. Click . The port mirroring settings are modified and the device is updated.
Performing Copper Cable Tests
The Performing Copper Cable Tests contains fields for performing tests on copper cables. Cable
testing provides information about where errors occurred in the cable, the last time a cable test was
performed, and the type of cable error that occurred. The tests use Time Domain Reflectometry
(TDR) technology to test the quality and characteristics of a copper cable attached to a port. Cables
up to 120 meters long can be tested. Cables are tested when the ports are in the down state, with
the exception of the Approximated Cable Length test.
Figure 5-96