NETGEAR GS700TS Series, User Manual

Page: 100 / 189

GS700TS Series Smart Switch Software User Manual
Configuring The Device Using Your Browser 5-71
v1.0, November 2006
Defining IP Interface
This section contains the following topics:
• Configuring IP Interfaces
Configuring IP Interfaces
The IP Interface Page contains fields for assigning
the IP address of the switch. The IP address may
either be statically defined or may be
retrieved using the Dynamic Host Configuration Protocol
(DHCP). The IP Interface Page also contains information for defining the default gateway. When
using DHCP, network devices can have a different IP address every time the device connects to the
network.
Note the following when configuring IP Addresses:
• If the device was accessed using the Smartwizard Discovery, the IP address retrieved through
DHCP is displayed.
• If the device fails to retrieve an IP address through DHCP, the default IP address is
192.168.0.239.