Factory Settings and Technical Specifications
48
AC750 Dual Band WiFi Range
Extender
Factory Default Settings
To reset the extender to factory default settings, you can use the
Factory Reset
button on
the side panel or you can log in and click the onscreen
RESET
button. For more information,
see
Return the Extender to Its Factory Default Settings
The following table shows the factory default settings.
Table 2. Factory default settings
Feature
Default Settings
Smart Setup
Enabled
WiFi communication
Enabled
WiFi network name (SSID)
NETGEAR_EXT
Security
Disabled
Transmission speed
Auto
1
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
Country/region
Varies by region
Operating mode
802.11a/b/g/n/ac
Data rate in the 2.4 GHz band
54/145/300 Mbps
Data rate in the 5 GHz band
54/145/300/433 Mbps
DHCP
Client enabled
