Get Started
11
AC750 Dual Band WiFi Range
Extender
Connect With WPS
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network
name and password.
Note:
WPS does not support WEP network security. If you are using WEP
security, follow the instructions in
Connect With Web Browser Setup
To use WPS to connect the extender to your WiFi router:
1.
Press the
WPS/Mode
button on the extender for less than five seconds until the
WPS/Mode LED blinks.
Note:
If you press the
WPS/Mode
button for more than five seconds, the
extender switches to access point mode. When the extender switches
to access point mode, the WPS/Mode LED and Power LED blink and
then the WPS/Mode LED turns off and the Power LED lights solid
green.
2.
Within two minutes, press the
WPS
button on your router or access point.
When the extender connects to your existing WiFi network, the WPS/Mode LED on the
extender lights solid green and the Router Link LED lights. If the Router Link LED does
not light, try again. If it still does not light, see
Connect With Web Browser Setup
3.
If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender
to the 5 GHz band.
4.
Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
5.
Plug the extender into an electrical outlet and wait for the Power LED to light green.
6.
Use the Router Link LED to help you choose a spot where the extender-to-router connection
is optimal.
7.
If the Router Link LED doesn’t light amber or green, plug the extender into an outlet closer
to the router and try again.
